Mixing To begin, a raw material mixture is placed in a mixing machine. Once inside, the raw materials are heated to 125 - 130 degrees Celsius to remove any water vapor present. Once finished, the material is cooled inside the mixing machine to prevent early plasticization or processing auxiliary decomposition. Extrusion After leaving the mixing machine, the raw material goes through an extrusion process. Temperature control is critical in this case to ensure that the material plasticizes properly. The material is routed through five distinct zones. Calendaring Once the material has been fully plasticized into a mold, it is time to begin the calendering process. A series of heated rollers is used to compound the mold into a continuous sheet in this case. The width and thickness of the sheet can be precisely controlled and consistent by manipulating the rolls. Once the desired thickness has been achieved, it is embossed using heat and pressure. Engraved rollers are used to apply the textured design to the product's face, which can be a light "tick" or a "deep" emboss. After the texture is applied, the scratch and scuff Top Coat is applied and the drawer is closed. Drawer The drawing machine, when used with frequency control, is directly connected to a motor that is perfectly matched to the production line speed and is used to deliver material to the cutter. Cutter The material is crosscut here to meet the appropriate guideline standard. To ensure clean and equal cuts, a sensitive and accurate photoelectric switch signals the cutter. Plate-Lifting Machine on Autopilot Following the cutting of the material, the automatic plate-lifting machine will lift and stack the finished product into the packing area for pick-up. How Do You Put Down SPC Flooring? SPC luxury vinyl flooring is available in planks or tiles that snap together to form a floating floor. Unlike previous versions, most do not require glue. They're simple to put together, even easier than laminate planks, because they can be cut by scoring with a knife and snapping. A saw is only required for cutting curves and notches. SPC flooring can be installed over a variety of other flooring materials, including hardwood, vinyl, and some types of tile. However, the sub-floor must be flat, so some preparation may be required first. If the product you are installing does not have one, an underlayment is also recommended. Finally, baseboards must be installed to keep the flooring in place.• Try our best to meet and exceed customer's expectation -- Strictly quality control, on-time delivery and prompt responsiveness to customers' requirements. • Fellow up and feed back tightly during production process. • Provide real pictures of loading container. • Provide free samples for trial sale. • Customized designs, colors, sizes and logos are welcome. • Price term and payment are negotiable.1.How do you guarantee the quality of your PVC vinyl flooring?    Each step is strictly controlled by the QC team to make sure all our products turn out great.    Our products have a limited warranty as long as 7~15 years. 2.How about the delivery time ?    Lead time since receipt of 30% T/T deposit payment : 30 days . (Samples will be prepared within 5 days.) 3.Do you offer other products besides PVC vinyl flooring?    Yes. Besides PVC vinyl flooring we also provide as T-molding, skirting , Click system vinyl flooring, WPC vinyl flooring AND so on interior decoration material . 4.Do you charge for the samples ?    According to our company policy ,We provide free samples ,But the freight charges need customers pay. 5.Can you produce according to customers' design ?    Sure,We are professional manufacturer ,OEM AND ODM are both welcome .

Name	Vinyl flooring (SPC flooring,click SPC flooring）
Color	Based on 3C lap dip series number or as your samples
Board Thickness	3.5mm,4.0mm,4.5mm,5.0mm,5.5mm,6.0mm
Wearing Layer Thickness	0.3mm,0.5mm as regular
Surface Texture	Deep Grain,Wood Grain,Marble Grain,Stone,Carpet
Finish	UV-Coating
Installation	Click system(Unilin,Valinge),Loose lay,Dray Back/Glue Down
Delivery Time	15-25 days
Size	Inch or MM
	6''*48''(150mm*1220mm)
	7''*48''(182mm*1220mm)
	9''*48''(230mm*1220mm)
	9''*60''(230mm*1525mm)
Backing Foam	IXPE(1.0mm,1.5mm,2.0mm) EVA(1.0mm,1.5mm)
Density	2kg/m3
Surface	Wood Embossed,Deep Wood Embossed,Hand scraped,Etc
Usages	Bedroom,Kitchen,Basements,Home,School,Hospital,Mall,Commercial to use.
Features	Waterproof,Wear resistant,Anti-slip,Moisture Proof,Fireproof，durable, anti-scratch, anti-bacterial.
Market	Export to American,Canadian,European Market,Part Asia,Africa Countries.Australia Market
Warranty	10 years for commercial and 25 years for residential

Supply Ability   4200000 Square Meter/Square Meters per Month Lead time:

Quantity (square meters)	1 - 1000	1001 - 2000	2001 - 5000	> 5000
Lead time (days)	10	20	30	To be negotiated

Packaging Details: carton+pallet Port:Qingdao